Terminal switches type UEr10G and UEt10G are used for switching the main and the auxiliary circuits to control contactor devices up to 500 V and the current load of 10 A. Terminal switches covers are made of aluminum alloy, mounted on both sides of the bushings and plugs P 16. The terminals allow the connection of conductors up to 4 mm2. The movable contact system is bridge with double interruption. The contacts are made of silver alloy.
Switchinging mechanism of terminal switches is controlled by a pivot or a pin roller. The switch rod is movable in the bearing, each position has an end stop. Minimum backlash switch is 2 mm. Permissible and operating strengths on the roller or pin for a two-pole switch: the minimum strength 20.6 N, maximum strength of 31.4 N.
Example of label
U E t 10 G 22 / 3
U E x 10 G 22 / x Switching mode
| |______________ 3:2 contacts
Propulsion 8:2 contacts
t: pivot 10:2 contacts
r: pin roller 14:2 contacts
Terminal switches UEMr 156, 1/1 1A 220Vss/15A 500V~
Terminal switches UEr 10G 41/39, 10A 500~/1,5A 220Vss
Terminal switches UEr 10G 41/7, 10A 500~/1,5A 220Vss
Terminal switches UEr 10G 21/6, 10A 500~/1,5A 220V~
Terminal switches UEr 10G 22/14, 10A 500V~/1,5A 220Vss
Terminal switches UEr 10G 22/3, 15A 500V~/10A 500V~
Terminal switches UEr 10G 22/3, 10A 500V~/1,5A 220Vss
Terminal switches UEr 10G 22/3, 15A 500V~/1A 220Vss
Terminal switches UEr 10G 22/8, 10A 500V~/1,5A 220Vss
Terminal switches UEr 10G 41/22, 10A 500V~/1,5A 220Vss
Terminal switches UEr 10G 61/36, 10A 500V~/1,5A 220Vss
Terminal switches UEt 10G 21/6, 15A 500V~/1A 220Vss
Terminal switches UEt 10G 22/3, 10A 500V~/1,5A 220Vss
Terminal switches UEt 10G 41/34, 15A 500V~/1A 220Vss
Terminal switches UEt 10G 61/19, 10A 500V~/1,5A 220Vss